Production Process
After the body machine outputs the mask body, the mask body sheet is transported to the turning mechanism by the conveyor belt structure. Flip the mask disc onto the conveyor belt connected to the ear belt machine through the turning mechanism, and then convey the mask sheet to the front face mask disk of the ear belt machine through the conveyor belt, and place the mask sheet into the mask disk of the ear belt machine by pressing down Then, the earband machine is used to complete the welding and sealing of the earband of the mask, thereby completing the production of a mask product with an in-plane ear line and edge banding.
main feature
Good welding effect, low failure rate; efficient production speed, up to about 75-96 pieces per minute, continuous production for 24 hours; fully automatic numerical control, servo drive, high degree of automation.
Use environment
Temperature 10～35℃, humidity 5-35 HR, no flammable, corrosive gas, no dust (cleanness is not less than 100,000).
Our main business: spiral vulcanizing machine, spiral freezer, forming machine, front helper
Consultation hotline: 13731739215
Specifications and parameters：
|
1
|
Production line model
|
LT-681
|
|
2
|
Applicable mask type
|
Flat medical mask
|
|
3
|
Finished product specifications
|
170mm*93mm
|
|
4
|
Production cycle
|
75-96/min
|
|
5
|
Applicable materials
|
Non-woven fabric
|
|
6
|
Applicable layers
|
4
|
|
7
|
Processing methods
|
Ultrasonic welding
|
|
8
|
power
|
10KW
|
|
9
|
power supply
|
220V
|
|
10
|
Welding headphones（mm）
|
1960×950×2000
|
|
11
|
Slicer（mm）
|
1800×800×1230
|
|
12
|
Unwinding rack（mm）
|
1650×660×1630
|
|
13
|
conveyor（mm）
|
1500×410×800
|
|
14
|
total weight
|
1000KG
|
|
15
|
Equipment type
|
Floor-standing
|